remove sd stuff

# Conflicts:
#   Steuerung_Truhen.ino

.gitignore

@@ -1,3 +1,6 @@
 .autogit
 *.txt
-*.pdf
+*.pdf
+output/
+Settings.h
+.vscode

Settings.h.original

@@ -0,0 +1,26 @@
+//* **EINSTELLUNGEN** *//
+#define SETUPTIMEOUT 500
+
+// So, the minimum sampling period is the minimum time 
+// interval that we need to wait between two consecutive 
+// measurements from the sensor. In the case of the DHT22, 
+// this value is of 2 seconds [1].
+
+static const unsigned long MESS_REFRESH_INTERVAL = 10000; // ms getMinimumSamplingPeriod == 2 sec 
+static const unsigned long SCHALT_REFRESH_INTERVAL = 60000; // ms
+static const unsigned long LCD_REFRESH_INTERVAL = 500; // ms
+
+const int uT = 1; //Abschalt-Temperatur in °C
+const int oT = 4; //Einschalt-Temperatur in °C
+
+/*
+Truhe truhen[] = {
+  Truhe("Truhe 1", 2, 8),
+  Truhe("Truhe 2", 3, 9),
+};*/
+//Name, Relaypin, DTH Pin
+Truhe truhen[] = {
+  Truhe("Truhe 1", D0, D2),
+};
+
+//LiquidCrystal_I2C lcd(0x3F, 0, 0, 0, 0, 0, 0, 0, 0, POSITIVE); //0x3F = Adresse des Displays

Steuerung_Truhen.ino

@@ -1,141 +1,15 @@
 #include <DHT.h> //Setup Sensoren
-#include <avr/wdt.h>
-
-#include <SD.h> //Setup SD SDK=D13, MOSI=D11, MISO=D12
 
 #include <Wire.h> //Setup LCD
 #include <LiquidCrystal_I2C.h>
-LiquidCrystal_I2C lcd(0x3F, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); //0x3F = Adresse des Displays
+
+#include "Truhe.h"
+#include "Settings.h"
 
 static unsigned long last_lcd_time = 0;
 static unsigned long last_mess_time = 0;
 static unsigned long last_schalt_time = 0;
 
-class Truhe {
-  private:
-    int _relay;
-    DHT _dht;
-    int _stat = -1;
-    int _cur_temp = 0;
-    int _updlcd = 0;
-    String _name = "";
-  public:
-    Truhe(String name, int relay, int dhtpin, int dhttype) {
-       _name = name;
-      _relay = relay;
-      _dht.setup(dhtpin);
-      pinMode(_relay, OUTPUT);
-    };
-
-    void mess() {
-      //Serial.println(String(_name) + " mess()");
-      //Serial.print("Minimum Sampling Period: "); 
-      //Serial.println(_dht.getMinimumSamplingPeriod());
-      //delay(_dht.getMinimumSamplingPeriod());
-      _cur_temp = _dht.getTemperature();
-      //Serial.println(String(_name) + "\t\t" + String(_cur_temp) + " grad gelesen");
-    };
-
-    void log(File logfile) {
-      //Serial.println(String(_name) + " log()");
-      String logdata = String(_name) + "\t" + String(_cur_temp) + "\t" + String(_stat);
-      logfile.println(logdata);
-    }
-
-    void updateLCD(int row) {
-      //Serial.println(String(_name) + " updateLCD("+String(row)+")");
-      //LCD-Anzeige
-      lcd.setCursor(0, row); //...(Zeichen,Zeile);
-      lcd.print(_name + " " + String(_updlcd));
-      
-      lcd.setCursor(8, row);
-      lcd.print("   ");
-      //Serial.println(sizeof(String(_cur_temp))/2);
-      lcd.setCursor(11 - sizeof(String(_cur_temp))/2, row);
-      lcd.setCursor(8, row);
-      lcd.print(String(_cur_temp));
-      lcd.setCursor(11, row);
-      lcd.print("\337");
-      lcd.setCursor(13, row);
-      if (_stat == -1) {
-        lcd.print("-");
-      }
-      else if (_stat == 1) {
-        lcd.print("I");
-      }
-      else if (_stat == 0) {
-        lcd.print("O");
-      }
-      if(_updlcd == 0){
-        lcd.setCursor(15, row);
-        lcd.print(String("|"));
-        //Serial.println(String(_name) + " updateLCD("+String(row)+") .");
-        _updlcd = 1;
-      }else{
-        lcd.setCursor(15, row);
-        lcd.print(String("-"));
-        //Serial.println(String(_name) + " updateLCD("+String(row)+") ");
-        _updlcd = 0;
-      }
-    }
-
-    void schalt(int oT, int uT) {
-      Serial.print(String(_name) + " schalt() stat: " + String(_stat));
-      if (_cur_temp >= oT && _stat != 1) {
-        digitalWrite(_relay, LOW);
-        _stat = 1;
-        Serial.println("schalt " + _name + " zu " + String(_stat));
-      }
-      else if (_cur_temp <= uT && _stat != 0) {
-        digitalWrite(_relay, HIGH);
-        _stat = 0;
-        Serial.println("schalt " + _name + " zu " + String(_stat));
-      }
-    }
-
-    void printName(){
-      //Serial.println(_name);
-    }
-};
-
-//* **EINSTELLUNGEN** *//
-#define DHTTYPE DHT22
-#define SETUPTIMEOUT 500
-// So, the minimum sampling period is the minimum time 
-// interval that we need to wait between two consecutive 
-// measurements from the sensor. In the case of the DHT22, 
-// this value is of 2 seconds [1].
-static const unsigned long MESS_REFRESH_INTERVAL = 10000; // ms getMinimumSamplingPeriod == 2 sec 
-static const unsigned long SCHALT_REFRESH_INTERVAL = 10000; // ms
-static const unsigned long LCD_REFRESH_INTERVAL = 500; // ms
-const int uT = 1; //Abschalt-Temperatur in °C
-const int oT = 4; //Einschalt-Temperatur in °C
-
-Truhe truhen[] = {
-  Truhe("Truhe 1", 2, 8, 0),
-  Truhe("Truhe 2", 3, 9, 0),
-};
-
-
-void setup_sd() {
-  //Initialsierugn SD
-  lcd.clear();
-  lcd.setCursor(0, 0); //...(Zeichen,Zeile);
-  lcd.print("Init SD");
-  if (!SD.begin(4)) { //Init SD_Karte mit CS auf Pin D4
-    lcd.setCursor(0, 1);
-    lcd.print("fehlgeschlagen!");
-    Serial.println("Init SD fehlgeschlagen!");
-    delay(SETUPTIMEOUT);
-    return;
-  } else {
-    lcd.setCursor(0, 1);
-    lcd.print("abgeschlossen!");
-    Serial.println("Init SD abgeschlossen!");
-    delay(SETUPTIMEOUT);
-  }
-}
-
 void setup_lcd() {
   //LCD
   lcd.begin(16, 2); //Starten des LCD, 16 Zeichen, 2 Zeilen
@@ -155,13 +29,12 @@ void setup() {
   Serial.println();
   Serial.println();
   setup_lcd();
-  setup_sd();
-  File logfile = SD.open("logTruhe.txt", FILE_WRITE); //Erstelle bzw. öffne log-Datei
-  logfile.println("t(min)\tTruhe\tT(°C)\tStatus");
-  logfile.close();
   lcd.clear();
-  
-  wdt_enable(WDTO_1S);   // Watchdog auf 1 s stellen
+  for (int i = 0; i < (sizeof(truhen) / sizeof(truhen[0])); i++) {
+    truhen[i].setup();
+  }
+  wdt_enable(WDTO_4S);   // Watchdog auf 4 s stellen
+  delay(3000);
   Serial.println("Setup fi");
 }
 
@@ -171,14 +44,8 @@ void loop() {
     //MESSINTERVALL
     last_mess_time = millis();
     for (int i = 0; i < (sizeof(truhen) / sizeof(truhen[0])); i++) {
-      truhen[i].printName();
       truhen[i].mess();
-
-      File logfile = SD.open("logTruhe.txt", FILE_WRITE);
-      truhen[i].log(logfile);
-      logfile.close();
     }
-    logfile.println();
   }
   //Serial.println("Schaltintervall: "+ String(millis() - last_schalt_time) + " " + String(SCHALT_REFRESH_INTERVAL));
   if(millis() - last_schalt_time >= SCHALT_REFRESH_INTERVAL || last_schalt_time == 0)
@@ -195,7 +62,39 @@ void loop() {
     //LCD Update INTERVALL
     last_lcd_time = millis(); 
     for (int i = 0; i < (sizeof(truhen) / sizeof(truhen[0])); i++) {
-      truhen[i].updateLCD(i);
+      //LCD-Anzeige
+      lcd.setCursor(0, i); //...(Zeichen,Zeile);
+      lcd.print(truhen[i].getName() + " " + String(truhen[i].getUpdLcd()));
+      
+      lcd.setCursor(8, i);
+      lcd.print("   ");
+      //Serial.println(sizeof(String(truhen[i].getCurTemp()))/2);
+      lcd.setCursor(11 - sizeof(String(truhen[i].getCurTemp()))/2, i);
+      lcd.setCursor(8, i);
+      lcd.print(String(truhen[i].getCurTemp()));
+      lcd.setCursor(11, i);
+      lcd.print("\337");
+      lcd.setCursor(13, i);
+      if (truhen[i].getStat() == -1) {
+        lcd.print("-");
+      }
+      else if (truhen[i].getStat() == 1) {
+        lcd.print("I");
+      }
+      else if (truhen[i].getStat() == 0) {
+        lcd.print("O");
+      }
+      if(truhen[i].getUpdLcd() == 0){
+        lcd.setCursor(15, i);
+        lcd.print(String("|"));
+        //Serial.println(String(truhen[i]._name) + " updateLCD("+String(i)+") .");
+        truhen[i].setUpdLcd(1);
+      }else{
+        lcd.setCursor(15, i);
+        lcd.print(String("-"));
+        //Serial.println(String(truhen[i]._name) + " updateLCD("+String(i)+") ");
+        truhen[i].setUpdLcd(0);
+      }
     }
   }
   wdt_reset();

Truhe.cpp

@@ -0,0 +1,46 @@
+#include "Truhe.h"
+Truhe::Truhe(String name, int relay, uint8_t dhtpin): _dht(dhtpin, DHT22) {
+   _name = name;
+  _relay = relay;
+  _dhtpin = dhtpin;
+  
+};
+
+void Truhe::setup() {
+  Serial.println("Setup " + _name);
+  Serial.println(_dhtpin);
+  pinMode(_relay, OUTPUT);
+  digitalWrite(_relay, HIGH);
+  pinMode(_dhtpin, INPUT);
+  _dht.begin();
+  delay(2000);
+}
+
+void Truhe::mess() {
+  Serial.println(String(_name) + " mess()");
+  //Serial.print("Minimum Sampling Period: "); 
+  //delay(_dht.getMinimumSamplingPeriod());
+  _cur_temp = _dht.readTemperature();
+  Serial.println(String(_name) + "\t\t" + String((int)_cur_temp) + " grad gelesen");
+};
+
+void Truhe::schalt(int oT, int uT) {
+  Serial.print(String(_name) + " schalt() stat: " + String(_stat));
+  if (_cur_temp >= oT && _stat != 1) {
+    digitalWrite(_relay, LOW);
+    _stat = 1;
+    Serial.println("schalt " + _name + " zu " + String(_stat));
+  }
+  else if (_cur_temp <= uT && _stat != 0) {
+    digitalWrite(_relay, HIGH);
+    _stat = 0;
+    Serial.println("schalt " + _name + " zu " + String(_stat));
+  }
+}
+int Truhe::getUpdLcd(){ return _updlcd;};
+void Truhe::setUpdLcd(int updlcd){ _updlcd = updlcd;};
+int Truhe::getRelay(){ return _relay;};
+int Truhe::getDhtPin(){return _dhtpin;};
+int Truhe::getStat(){return _stat;};
+float Truhe::getCurTemp(){return _cur_temp;};
+String Truhe::getName(){return _name;};

Truhe.h

@@ -0,0 +1,23 @@
+#include <DHT.h>
+class Truhe {
+  private:
+    DHT _dht;
+    int _relay;
+    uint8_t _dhtpin;
+    int _stat = -1;
+    float _cur_temp = 0;
+    int _updlcd = 0;
+    String _name = "";
+  public:
+    Truhe(String, int, uint8_t);
+    void setup();
+    void mess();
+    void schalt(int, int);
+    int getUpdLcd();
+    void setUpdLcd(int);
+    int getRelay();
+    int getDhtPin();
+    int getStat();
+    float getCurTemp();
+    String getName();
+};